
| Angled Cap 30 Degree EF3/Euro Bayonet Fitting inc Cap Seal This angled cap gives spray operators the oppurtunity of achieving the benefits of angling any spray nozzle at a 30 degree angle, both forward or backwards along the spray boom, whilst using any existing standard sized 8mm spray nozzles. The two part cap and seal is manufactured in chemiacl esistant materials and can be connected to any universal EF3/ Euro style bayonet fittings, as shown in the additional images on both Hypro and Teejet Nozzle holders. The cap be used to eliminate the cost of having to buy expensive angled nozzles. |
| What type of nozzle holder will this cap fit ? The additional images are of the following 1. Angled Caps Shown Fitted with Nozzles made by different nozzle manufacturers. Hypro 03F80 , Teejet XR11008, BFS Bubble Jet 015, Lechler IDK 025, Arag ASJ WR11006 2. Angled Cap on Hypro Proflo 4 Way Nozzle Holder 3. Angled Cap on Arag Triplet Nozzle Holder 4. Angled Cap on Hypro Proflo Single Nozzle Holder 5. Angled Cap on Teejet/Spraying Systems Single Nozzle Holder 6. Angled Cap on Teejet /Spraying Systems Single Nozzle Holder 7. Angled Caps Shown Fitted with Nozzles made by different nozzle manufacturers. Hypro 03F80 , Teejet XR11008, BFS Bubble Jet 015, Lechler IDK 025, Arag ASJ WR11006 Most standard 8mm sized nozzles will fit within these 30 degree angled caps. For Use on Hardi Sprayers, the additional Hardi Adaptoer for use with Bayonet caps will be needed in addition to this nozzle cap. |
