Berthoud Anti Drip Pressure Control Valve
These valves will fit all Berthoud Sprayers that have a standard nozzle assembly at the end of the lance with the 18mm male thread and nozzle cap
The valves will not fit Berthoud sprayers that have the Berthoud Intergal Nozzle Cap Nut style fitted. Part number 200806 will need to be purchased instead which include the 45 degree lance end to accept the Anti Drip valve
We have two versions of the valve available
The valve works by staying closed and will not open untill sufficient pressure (as listed below) has been reached to allow the valve to open
The valve will also shut off if the operating pressure drops below the pre-set pressures as below
Yellow Valve 1 Bar Operation
Red Valve 1.5 Bar Operation
The yellow valve is supplied as standard with all Berthoud 2000 Pro Weed Control Sprayers
The Valves are preset and cannot be adjusted
This valve fits at the end of the lance, with the nozzle and nozzle cap attached to it.
The items being included are as follows
1 x Fluid Control Valve
2 x Sealing washers
1 x 18mm nozzle cap
|
