Cooper Pegler Fluid Control Valve
These valves will fit all Cooper Pegler Sprayers that have the Grp Plastic lances
The valve works by staying closed and will not open untill sufficient pressure (as listed below) has been reached to allow the valve to open. The valve will also shut off if the operating pressure drops below the pre-set pressures as below
Yellow Valve 1 Bar Operation
Red Valve 1.5 Bar Operation
The valve is supplied as standard with all Cooper Pegler 2000 Series Sprayers
The Valves are preset and cannot be adjusted
This valve fits at the end of the lance, with the nozzle and nozzle cap attached to it.
The older version that was fitted directly after the trigger is now obselete and no longer available.
This item does not include the nozzle cap, nozzle tip or lance. The item being purchased is the Fluid Control Valve only.
To Fit Cooper Pegler Brass Lances
This item can be adapted to fit Cooper Pegler brass lances with the addition of a small adaptor to convert the thread from 1/4" Bsp to 18mm
147351 - 1/4" Bsp x M18 Brass Lance Adaptor is available from Agratech
|
