| Hypro Lurmark Deflectip 80 - 145 Degrees The Hypro Deflectip or flood spray tip produces a wide angled spray pattern from 80-145 degrees commonly used for band spraying and also widely used in Knapsacks. It is available in the following sizes/colours and has Quantity based prices The more you buy, the cheaper each nozzle costs. DT0.5 Orange DT0.75 Dark Green DT1.0 Yellow DT1.5 Blue DT2.0 Red DT2.5 Brown DT3.0 Grey DT4.0 White DT5.0 Light Blue DT7.5 Light Green DT10 Black DT15 Pink DT20 Purple |
| Hypro Lurmark Deflectip 80 - 145 Degrees Do not confuse this nozzle with the similar looking Polijet nozzle, as the DT nozzle has completely different spray widths and outputs, even though there are some DT nozzles look like and are coloured the same as Polijet nozzles These nozzles were previously listed as AN 0.5 to AN 20, and where changed to ISO sizes and colours The Hypro DT nozzles have the same output as the old sized AN0.5 - AN20 nozzles, but when the change to ISO sizes and colours was brought into effect in the mid 1990's, they were rebranded as Deflectip or DT nozzles The Hypro Deflectip produces a wide angled even spray (80-145 degrees) making it ideal for banding pre and post emergent herbicides When selected as a medium spray, the Deflectip is good for applying cereal fungicides Large orifice produces coarser droplets which are less prone to drift and blocking Can be used over a pressure range of 1 to 5 bar (15 to 70 psi approx) Recommended for use in knapsacks Fits in most nozzle caps Precision moulded in tough and durable polyacetal, with a spray angle tolerance of +/- 5% |
Hypro Lurmark Deflectip 80 - 145 Degrees Nozzle Output Chart PDF download: Deflectip-Nozzle-Chart.pdf |
