Hypro Duo React Twin Valve Nozzle Body Pneumatic Version

Not rated yet
0

.

  • £37.40
Qty:  
  • Shipping info

    Please see the delivery options available at checkout. 

  • Payment methods

    We accept the following payment methods:

    Accepted payment methods

  • Return Policy

    Please see our returns tab for full details. 

Hypro Duo React single outlet on one side and manually rotatable four way turret on the other in a compact, lightweight assembly
Incorporates two fast-acting pneumatically actuated valves to select either or both outlets

Requires suitable switch to be installed in the cab
Fail safe valve design with air to open, stainless steel springs to close

Eliminates the need for twin spraylines or ‘back to back’ configurations

Compact design to fit available spray boom space. Hinged clamp options; 1/2", 3/4", 1", 20mm and 25mm

Practical Applications

Provide a permanent home for a liquid fertiliser dribble bar

Fit two different sizes of liquid fertiliser nozzles for a wider range of application rates. Operate each singly then both together;
For example; a red (04) and a grey (06) offer a five fold application range
Suitable controller can select outlet(s) and pressures to apply variable rates across field

Makes an alternative nozzle readily available and easily selected;
Save time switching between the most commonly used nozzles
Switch between standard and drift-reducing nozzles as spraying conditions change in the field
Comply with label requirements by switching to LERAP 3 star rated nozzles to eliminate water course buffer zones
Switch nozzles on the move in the event of a blockage
Response time 0.1 seconds to open and close

Specifications and Dimensions

Please see product downloads above for full operating and use instructions 
Male bayonet for fitting EF3 type caps (Hypro®, Teejet®, Arag®, Geoline®, Agrotop®, Lechler®)
Each outlet has a flow capacity of 6.0 lpm (equivalent to size 15 nozzle) with negligible pressure drop
Pneumatic actuation of valves at 3-7 bar. Normally closed up to 10 bar liquid pressure
3/8” (9.53 mm) feed spigot to fluid pipe
0-50°C operating temperature (-40 to 80°C dry storage)
Waterproof to BSEN60529 (IP65). Tolerant to typical UV, dust, vibration and impact likely to be encountered in an an agricultural spraying environment
Dry weight 211g
4mm push fit air inlet and outlet connectors
 

 

 

 

    • Weight
      0.22 kgs
    • SKU
      4214-1502V
  • Manufacturer
    Pentair Hypro
  • Brand
    Hypro
  • Nozzle Holder Pipe Size
    4214-1502V 1/2" Duo React Air, 4214-1503V 3/4" Duo React Air, 4214-1504V 1" Duo React Air, 4214-1507V 20mm Duo React Air, 4214-1508V 25mm Duo React Air

Please note that the shipping charge covers the cost of shipping, packaging and the time taken to fulfil your order. These charges can only be confirmed once you have filled in your delivery address details in the checkout area, as we offer different shipping services, for different shipping areas.
All shipping is offered as a working day delivery and does not include Bank Holidays or Weekends.

FREE SHIPPING - Only includes items listed as Free Shipping, and excludes any other items added to the same order.

Free shipping items are generally shipped from different locations and will be dispatched separately from other items.

Delivery of Tanks -  The delivery of tanks is to Uk mainland England and Wales, and excludes Scotland and any other outlying areas. Additional delivery charges and lead times will apply to these areas.

Making a purchase from Agratech NW Ltd could not be easier as all you need to do is to add any items that you wish to buy into the shopping cart. After you have finished your selection, click on  ‘Basket' at the top right of the page and you will be asked for your contact details and given a choice of shipping options, so we are able to complete your order. You will then be directed to our Secure Online Payments system SagePay which will process and charge your debit, credit card or PayPal account immediately. After payment has been made you will be returned to www.agratech.co.uk and a copy of your order will be emailed to the email address included within your order.

We also endeavour to have a zero waste policy with all the packaging that we receive from our suppliers and therefore will reuse packaging to dispatch customer orders wherever possible to reduce waste. Any packaging waste we do generate is minimal and is not fit for re-use.

We accept the following payment methods:


  1.  If for this, or any other reason a product is not acceptable, Agratech NW Ltd must be notified by email and the products returned within 14 days of receipt. The product may be returned for a full refund (minus any carriage charges) to your credit/debit card or PayPal account. This does not affect your statutory rights. 
  2. The goods must be returned in an unopened, unused and resalable state. Any returned items that have been opened or used will not be credited, unless by prior arrangement and acceptance by the company.
  3. Returns of Spraytips or Sprayer nozzles: All Nozzles and Spraytips are manufactured as precision items, and they are supplied to you as such. They are dispatched in a sealed plastic bag. Once the sealed bag has been opened, the contents then become "Non Returnable and Non refundable". There are no exceptions to this rule. It is the responsibility of the user, to ascertain the suitability of any spray tips or nozzles prior to purchase.
  4.  Agratech NW Ltd will not be held liable for the loss in transit of any returned item(s). We advise you to ensure the products are adequately packed and insured during any return journey. We would also advise you to use a courier or tracked delivery service, if you are unable to deliver the products personally. Proof of posting is not proof of delivery.
  5. If the Customer requires the products to be collected, the cost of this collection will be borne by the Customer, any product collections will be by Courier and the cost of this will be deducted from any refund due. Refunds are processed on a stand alone basis. 
  6. If you require an alternative item please place a new order on our website.
  7. Returns of special order items, or special products, are non returnable. Any items sold that are"non stock' and have to be ordered in especially, will be deemed as special order items.
  8. All goods supplied are subject to the manufacturers terms of supply and warranty, were applicable.
  9. Please note that some of our larger or bulky items may be shipped direct from the supplier and in such circumstances, return of these items is at the sole discretion of the supplier. 
Customer reviews
There are no reviews yet. Be the first to leave a review.
Please sign in to add review

Which Size Nozzle Holder Fits My Sprayline ?

Nozzle Holder Pipe Sizes

The sizes as listed refer to the Nominal Bore of the pipe and not the Outside Diameter. Please follow the sizing below to determine which size of nozzle holder you require. Please allow a tolerance, either direction of the sizes below, as some pipe sizes may vary slightly from the dimensions below.

Nozzle Holder Size To Fit Outside Diameter Pipe

1/2" Nozzle Holder will fit 19 - 21mm (Approx) Outside diameter of pipe

3/4" Nozzle Holder will fit 25 - 27mm (Approx) Outside diameter of pipe

1" Nozzle Holder will fit 31 - 33mm (Approx) Outside diameter of pipe