Hypro Syngenta Defy 3D Nozzle Supplied Complete with coloured EF1-Euro fitting self aligning nozzle cap and seal
Sizes 015 Green, 02 Yellow, 025 Lilac, 03 Blue, 035 Brown Red, 04 Red 05 Brown, 06 Grey and 08 White available from stock.
You will dramatically increase your chances of hitting a target if you aim at it.
Water Volume: Best nozzle at 100 l/ha as the effect of the angle outweighs the need for more water to gain coverage increases. Using 100 l/ha increases the time spent spraying vs. filling and traveling
Pressure: Runs at pressure between 0.7 and 3 bar. (Pressures below 1 bar may not be achievable on sprayers with diaphragm check valves governing the nozzle on/off)
Application speed: 12-14 km/h. If conditions are sub-optimal slow down and apply at 12 km/h.
Boom height: Highest efficacy at both 50 and 75 cm boom heights, allowing for the boom to be run a comfortable level above the target with no worries about drop off in deposition.
"Correct sprayer speed, boom height and angled nozzles all improve blackgrass control. New DEFY 3D nozzles give 2.5 times more coverage, and reduce drift by over 50% compared to using a flat-fan.”
Ben Magri, New Farming Technologies Specialist, Syngenta