Hypro Duo React Twin Valve Nozzle Body Pneumatic Version
Hypro Duo React Twin Valve Nozzle Body Pneumatic Version

Hypro Duo React Twin Valve Nozzle Body Pneumatic Version

Code: 4214-1502V
Price: £34.00  + VAT
(£40.80 inc VAT)
Nozzle Holder Pipe Size:

Hypro Duo React single outlet on one side and manually rotatable four way turret on the other in a compact, lightweight assembly
Incorporates two fast-acting pneumatically actuated valves to select either or both outlets

Requires suitable switch to be installed in the cab
Fail safe valve design with air to open, stainless steel springs to close

Eliminates the need for twin spraylines or ‘back to back’ configurations

Compact design to fit available spray boom space. Hinged clamp options; 1/2", 3/4", 1", 20mm and 25mm

Practical Applications

Provide a permanent home for a liquid fertiliser dribble bar

Fit two different sizes of liquid fertiliser nozzles for a wider range of application rates. Operate each singly then both together;
For example; a red (04) and a grey (06) offer a five fold application range
Suitable controller can select outlet(s) and pressures to apply variable rates across field

Makes an alternative nozzle readily available and easily selected;
Save time switching between the most commonly used nozzles
Switch between standard and drift-reducing nozzles as spraying conditions change in the field
Comply with label requirements by switching to LERAP 3 star rated nozzles to eliminate water course buffer zones
Switch nozzles on the move in the event of a blockage
Response time 0.1 seconds to open and close

Specifications and Dimensions

Please see product downloads above for full operating and use instructions 
Male bayonet for fitting EF3 type caps (Hypro®, Teejet®, Arag®, Geoline®, Agrotop®, Lechler®)
Each outlet has a flow capacity of 6.0 lpm (equivalent to size 15 nozzle) with negligible pressure drop
Pneumatic actuation of valves at 3-7 bar. Normally closed up to 10 bar liquid pressure
3/8” (9.53 mm) feed spigot to fluid pipe
0-50°C operating temperature (-40 to 80°C dry storage)
Waterproof to BSEN60529 (IP65). Tolerant to typical UV, dust, vibration and impact likely to be encountered in an an agricultural spraying environment
Dry weight 211g
4mm push fit air inlet and outlet connectors




Which Size Nozzle Holder Fits My Sprayline ?

Nozzle Holder Pipe Sizes

The sizes as listed refer to the Nominal Bore of the pipe and not the Outside Diameter. Please follow the sizing below to determine which size of nozzle holder you require. Please allow a tolerance, either direction of the sizes below, as some pipe sizes may vary slightly from the dimensions below.

Nozzle Holder Size To Fit Outside Diameter Pipe

1/2" Nozzle Holder will fit 19 - 21mm (Approx) Outside diameter of pipe

3/4" Nozzle Holder will fit 25 - 27mm (Approx) Outside diameter of pipe

1" Nozzle Holder will fit 31 - 33mm (Approx) Outside diameter of pipe

The website uses cookies to allow us to better understand how the site is used. By continuing to use this site, you consent to this policy. Click to learn more.